Table of Contents
Advertisement
LAN Channel Configuration Screen 2 –Server Management and Serial Over
LAN Setup
This screen allows you to continue to enter the necessary settings to configure the specified LAN
channel.
When this screen is displayed, the settings shown are the current settings for this LAN channel on
the server. The continue button is enabled at all times on this screen.
Enable LAN Access: Enable LAN Access allows you to enable or disable the LAN access for
the server. When checked, all of the LAN access parameters are enabled and you can set them
to the appropriate values. When not checked, all of the LAN access parameters on this page are
disabled. The state of this option also determines whether Serial Over LAN (SOL) can be set
up. If this option is disabled, SOL cannot be configured and the Enable Serial Over LAN
checkbox is disabled.
LAN Privilege Level Limit: Privilege Level Limit dropdown list allows you to select a
privilege limit for the channel that is being configured. This privilege level takes precedence
over the user privilege limit. If a channel privilege level is set at User level, for example, then
users can only execute user-level commands, even if the user privilege level is set higher than
User. The meanings of the different privilege level limits are explained below.
Figure 29. LAN Channel Setup Screen 2
89
Advertisement
Table of Contents
Troubleshooting
