Figure 33. Remaining Serial/Modem Configuration Parameters - Intel SR6850HW4 - Server Platform - 0 MB RAM Product Manual

Serial/Modem Configuration Screen 2 - Configuring Remote Server
Management Options for a Serial / Modem Connection
This screen allows you to continue to enter the necessary settings to configure the serial/modem
channel.

Figure 33. Remaining Serial/Modem Configuration Parameters

Enable Access: The Enable Access checkbox allows you to enable or disable Serial/Modem
connectivity. When checked, all of the Serial/Modem parameters are enabled and you can set
them to the appropriate values. When not checked, all of the Serial/Modem parameters on this
page are disabled.
Serial Privilege Level: The Serial Privilege Level dropdown list allows you to select a
privilege limit for the serial channel. This privilege level takes precedence over the user
privilege limit. If the privilege level is set at User level, for example, then users can only
execute user-level commands, even if the user privilege level is set higher than User. The
possible privilege level choices are the same as the LAN Privilege levels.
Connection Mode: The Connection Mode combo allows you to configure the method to
connect to the Serial/Modem connectivity. The valid choices are:
- Direct Connect: For applications that connect to the serial/modem port directly to another
computer system.
- Modem Mode: For applications where the serial/modem port is connected to an external
modem.
95