Intel SR6850HW4 - Server Platform - 0 MB RAM Product Manual page 92

Server Platform Utilities
case of single node destination, this is the unicast or specific IP address. This is the IP Subnet
address if the alert needs to be broadcast within a particular subnet.
Resolve Alert Destination 2 MAC Address: The Resolve Alert Destination 2 MAC Address
checkbox, if enabled, instructs the SCW to attempt to automatically resolve the MAC for this
LAN channel. If the Alert Destination 2 MAC address cannot be resolved, then the SCW will
display a dialog, which allows you to enter a MAC address. A final option would be to
continue, which would result in alerts being sent via broadcast.
Alert Destination 2 MAC Address: The Alert Destination 2 MAC Address edit box allows
you to enter the MAC address for the second alert destination on this LAN channel. The Alert
Destination MAC Address is the physical or the Ethernet address of the Alert Destination. It
corresponds to the Alert Destination IP Address. The MAC address is entered as six dotted
hexadecimal bytes, such as 3e.4d.ab.12.c3.23
SNMP Community String: The SNMP Community String edit box allows you to enter the
community field in the Header section of the SNMP trap sent for a LAN alert. If a string is not
set on the server, then the SCW will display and set the string as public. The string must be
from 5 – 18 characters long.
LAN Alert Filters: If you press the LAN Alert Filters button, the SCW will display the
following screen with which you can check the filters that are to be used when sending out
alerts.
No Email Alerts: The No Email Alerts Radio Button allows you to specify that none of the
alerts that may be configured are to go to any configured email addresses. This is the default
setting in Intel® Management Module– Professional Edition system configurations, and cannot
be changed on these system configurations.
Send Email Alerts via LAN Alert IP Address 1: The Send Email Alerts via LAN Alert IP
Address 1 radio button allows you to specify that all LAN alerts configured to go the first alert
IP address are instead to be sent as emails. This option is available only on the Intel®
Management Module– Advanced Edition system configuration.
Send Email Alerts via LAN Alert IP Address 2: The Send Email Alerts via LAN Alert IP
Address 2 radio button allows you to specify that all LAN alerts configured to go the second
alert IP address are instead to be sent as email messages. This option is available only on the
Intel® Management Module– Advanced Edition system configuration.
92 Intel® Server Platforms SR6850HW4 and SR6850HW4/M Product Guide