Replacing The Front Panel Board; Installing The Front Panel Control Module - Intel SR6850HW4 - Server Platform - 0 MB RAM Product Manual

Servicing the RAID on Peripheral Area Components

Replacing the Front Panel Board

1. Observe the safety precautions, warnings, and cautions described in
5.
2. Remove the front panel control module. For instructions, see
Control Module", page 205.
3. Remove the screws that hold the front panel board to the Front Panel Control Module.
4. Use the screws to attach the new front panel board to the Front Panel Control Module.
5. Install the Front Panel Control Module. For instructions, see
Module".

Installing the Front Panel Control Module

1. Observe the safety precautions, warnings, and cautions described in
2. Push the replacement Control Panel until it is securely seated in the front of the server.
3. Connect the cable between the Front Panel Control Module and the SCSI backplane board.
4. Install the top cover. For instructions, see
206
"Installing the Top
Intel® Server Platforms SR6850HW4 and SR6850HW4/M Product Guide
"Safety Information", page
"Removing the Front Panel
"Installing the Front Panel Control
"Safety Information".
Cover", page 140.