Removing The Core Processor Vrm Converters; Figure 98. Removing Processor 4 Vrm Baffle - Intel SR6850HW4 - Server Platform - 0 MB RAM Product Manual

Servicing the Processors

Removing the Core Processor VRM Converters

1. Observe the safety precautions, warnings, and cautions described in
2. Turn off all peripheral devices connected to the system.
3. Power down the system and unplug both AC power cords.
4. Remove the top cover. For instructions, see "Removing the Top Cover", page 144.
5. Remove memory boards or memory board air baffles from Slots C and D. For instructions,
"Cold Removal of Memory
6. Remove the Fibre Channel Module. For instructions, see
Module", page 156.
7. Optional: Remove the center brace. For instructions, see
176.
NOTE
The two Processor Core VRM converters are located under the center brace.
You do not need to remove the center brace to remove or install the
processor VRM converters.
8. If you are removing the fourth processor core VRM, remove the VRM baffle:
Push down at the top of the baffle to unlatch it. See letter "A" in Figure 98.
Pull the cover out at an angle. See letter "B" in the figure.
188
Board", page 165.
A

Figure 98. Removing Processor 4 VRM Baffle

Intel® Server Platforms SR6850HW4 and SR6850HW4/M Product Guide
"Information", page
"Removing the Fibre Channel
"Removing the Center Brace", page
B
TP01539
5.