11. Install the memory board or the memory board air baffle into Slot D. For instructions, see
"Cold Insertion of a Memory
12. Re-install the top cover. For instructions, see
Removing the Intel
1. Observe the safety precautions, warnings, and cautions described in
5.
2. Turn off all peripheral devices connected to the system.
3. Power down the system and unplug both AC power cords.
4. Remove the top cover. For instructions, see "Removing the Top Cover", page 144.
5. Remove the memory board or the memory board air baffle from Slot D. For instructions, see
"Cold Removal of Memory
6. Disconnect the battery cable from the main board.
7. Pinch the top and bottom covers of the battery holder to open it.
8. Remove the Intel
9. Install the memory board or the Memory Baffle air baffle into Slot D. For instructions, see
"Cold Insertion of a Memory
10. Re-install the top cover. For instructions, see
®
Figure 103. Lock Intel
Board", page 165.
®
RAID Smart Battery
Board", page 165.
®
RAID Smart Battery from the chassis.
Board".
B
RAID Smart Battery into Place
"Installing the Top
Cover", page 140.
"Installing the Top
Cover", page 140.
TP01548
"Safety
Information", page
195