Figure 43. Open Pci Add-In Card Retention Device; Figure 44. Removing Pci Add-In Card - Intel SC5650SCWS Service Manual

Hardware Installations and Upgrades
5. Disconnect any cables that may be attached to the PCI add-in board that needs to be removed.
6. Firmly grab the PCI add-in board by its top edge or upper corners and remove from the expansion slot on the workstation
board (see letter "A" in the following figure). Place the removed add-in board in an anti-static protective wrapper. Close the
back panel PCI Add-in Card Retention Device (see letter "B").
7. If available, replace the PCI slot shield by pressing the slot shield into the opening on the chassis.
Intel® Workstation System SC5650SCWS Service Guide

Figure 43. Open PCI Add-in Card Retention Device

Figure 44. Removing PCI Add-in Card

48