Replacing the Front Panel I/O Board
The front panel board resides next to the front fan bay.
Removing the Front Panel I/O Board
1. Observe the safety precautions, warnings, and cautions described in
5.
2. Remove the top cover. For instructions, see "Removing the Top Cover".
3. Remove the processor air baffle. For instructions, see
page 174.
4. Disconnect all cables attached to the front panel I/O board.
5. Unscrew the captive screw on the board.
6. Pull up the captive screw, slide the board towards the rear of the chassis until the tabs
disengages with the board.
7. Lift the board from the chassis.
8. Store the front panel I/O board in anti-static packaging.
A
B
C
D
Figure 122. Removing the Front Panel I/O Board
"Safety
Information", page
"Removing the Processor Air
C
B
Baffle",
TP01473
219