Replacing The Front Panel Control Module And Front Panel Board; Removing The Front Panel Control Module; Figure 112. Removing The Front Panel Control Module - Intel SR6850HW4 - Server Platform - 0 MB RAM Product Manual

Product guide
Table of Contents

Advertisement

Replacing the Front Panel Control Module and Front
Panel Board
The Front Panel Control Module resides next to the fan bay. The front panel board is installed onto
the Front Panel Control Module.
To replace the Front Panel Control Module, use the following steps:
"Removing the Front Panel Control
"Installing the Front Panel Control
Disregard the instructions describing the replacement of the front panel board.
To replace the front panel board, use the following steps:
"Removing the Front Panel Control
"Replacing the Front Panel
"Installing the Front Panel Control

Removing the Front Panel Control Module

1. Observe the safety precautions, warnings, and cautions described in
5.
2. Turn off all peripheral devices connected to the system.
3. Power down the system and unplug both AC power cords.
4. Remove the top cover. For instructions, see "Removing the Top Cover", page 144.
5. Disconnect the cable between the front panel board and the SCSI backplane board.
6. Push the control panel out through the front of the chassis and store it in an anti-static bag.
B
Module", page 205
Module", page 206
Module"
Board", page 206
Module"

Figure 112. Removing the Front Panel Control Module

"Safety
A
A
Information", page
TP01577
205

Advertisement

Table of Contents
loading

Table of Contents