Table of Contents
Advertisement
Server Platform Utilities
Serial/Modem Configuration Screen 1 – Modem Setup
When the screen comes up, the settings displayed are the current setting on for the serial/modem
channel on the server. All fields on this screen are required to have valid data entered. The
Continue button is disabled/grayed out until all of the edit boxes on the screen above have data
entered.
ESC Sequence: The ESC Sequence edit box allows you to enter the escape sequence string for
the modem. The string is sent to the modem before sending a command string to the modem.
The edit control will limit the number of characters that can be entered for the ESC Sequence
string to five.
Hangup String: The Hangup Line edit box allows you to enter the hangup ling string. This
string is sent to the modem whenever the EMP wants to terminate the session. The EMP
automatically sends an <Enter> character after this string. The edit control will limit the
number of characters that can be entered for the Hangup String to eight.
Modem Init String: The Modem Init String edit box allows you to enter the modem
initialization string. This string is transmitted every time a serial/modem connection is
initialized. The string length of the Modem Init String is determined at run time and the edit
control will limit the number of characters that can be entered to that value.
Modem Dial Command: The Modem Dial Command edit box allows you to enter the modem
dial command string. This string is transmitted every time a Platform Event Page is sent. This
string is sent before the paging string to indicate to the modem how to dial.
94
Figure 32. Modem Configuration
Intel® Server Platforms SR6850HW4 and SR6850HW4/M Product Guide
Advertisement
Table of Contents
Troubleshooting
