Intel SR6850HW4 - Server Platform - 0 MB RAM Product Manual page 245

Progress Code Progress Code Definition
0xB0 Resetting fixed media device
0xB1 Disabling fixed media device
0xB2 Detecting presence of a fixed media device (IDE hard drive detection, etc.)
0xB3 Enabling/configuring a fixed media device
Removable media
0xB8 Resetting removable media device
0xB9 Disabling removable media device
0xBA Detecting presence of a removable media device (IDE CDROM detection, etc.)
0xBC Enabling/configuring a removable media device
BDS
0xDy Trying boot selection y (where y = 0 to F)
PEI Core
0xE0 Started dispatching early initialization modules (PEIM)
0xE2 Initial memory found, configured, and installed correctly
0xE1,0xE3 Reserved for initialization module use (PEIM)
DXE Core
0xE4 Entered EFI driver execution phase (DXE)
0xE5 Started dispatching drivers
0xE6 Started connecting drivers
DXE Drivers
0xE7 Waiting for user input
0xE8 Checking password
0xE9 Entering BIOS setup
0xEA Flash Update
0xEE Calling Int 19. One beep unless silent boot is enabled.
0xEF Unrecoverable Boot failure/S3 resume failure
Runtime Phase/EFI OS Boot
0xF4 Entering Sleep state
0xF5 Exiting Sleep state
0xF8 OS has requested EFI to close boot services (ExitBootServices ( ) has been called)
0xF9 OS has switched to virtual address mode (SetVirtualAddressMap ( ) has been called)
0xFA OS has requested the system to reset (ResetSystem () has been called)
PEIM/Recovery
0x30 Crisis recovery has been initiated because of a user request
0x31 Crisis recovery has been initiated by software (corrupt flash)
0x34 Loading crisis recovery capsule
0x35 Handing off control to the crisis recovery capsule
0x3F Unable to complete crisis recovery.
245