User Guide for NUC10i7FNKN, NUC10i5FNKN, NUC10i3FNKN
This guide tells you how to:
Install and remove memory
•
Install an M.2 SSD
•
Install a VESA mount bracket
•
Connect power
•
Install an operating system
•
Install the latest drivers
•
Open the Chassis
Unscrew the four corner screws on the bottom of the chassis and lift the cover.
Installing and Removing Memory
Intel NUC Kits NUC10i7FNKN, NUC10i5FNKN and NUC10i3FNKN have two 260-pin DDR4 SO-DIMM
sockets. Memory requirements:
1.2V low voltage memory
2666 MHz SO-DIMMs
Non-ECC
Find compatible memory modules in the Intel Product Compatibility Tool
NUC10i7FNKN
NUC10i5FNKN
NUC10i3FNKN
NOTE
If you plan to install only one memory module, install it in the lower memory
socket.
3