9. Insert the bootable floppy disk into the USB floppy disk drive.
10. Using the arrow key select the USB floppy drive. Press <Enter>. The system will boot to the
floppy disk.
11. After DOS is booted, type FDISK and complete the following operations:
12. Delete existing partitions
13. Create a new partition
14. Make sure the partition is active
15. Reboot
16. After the system rebooted to the floppy disk, type FORMAT C: /S/U to format the created
partition
17. Reboot the server.
18. Enter the System Options Menu, as you did in step 5.
19. Select the "Boot Manager". Press <Enter>.
20. Select the USB flash memory drive as the boot device. The system boots to DOS on the USB
memory device.
226
Intel® Server Platforms SR6850HW4 and SR6850HW4/M Product Guide