Figure 34. Configuring Serial Alerts - Intel SR6850HW4 - Server Platform - 0 MB RAM Product Manual

Server Platform Utilities
System Phone Number: The System Phone Number edit box allows you to enter the phone
number used to connect to this system. The length of the phone number allowed is determined
at run time. The SCW will limit the number of characters that can be entered at runtime.
Serial/Modem Configuration Screen 3 - Configuring Alerting over a
Serial/Modem Connection
This screen allows you to continue to enter the necessary settings to configure the serial/modem
channel. The Continue button is disabled/grayed out until all edit boxes on the screen have data
entered.
Enable Serial/Modem Paging Checkbox: The Enable Serial/Modem Paging checkbox allows
you to enable Serial/Modem paging. When checked, the remaining controls on this screen are
also enabled so that Serial/Modem paging can be configured. If this checkbox is cleared, all
controls are disabled and Serial/Modem paging shall be disabled on the server.
Alert Destination Phone Number Edit Box: The Alert Destination Phone Number edit box
allows you to enter the phone number of the system that is to receive Alerts through a
serial/modem connection.
Paging String Edit Box: The Paging String edit box allows you to enter the paging string that
contains the characters that are sent once the connection has been made. The length of the
Paging String is determined at run time. The paging string is concatenated with the Alert
Destination Phone Number entered on this screen. Therefore, it is not necessary to enter the
Alert Destination Phone Number with the Paging String.
96

Figure 34. Configuring Serial Alerts

Intel® Server Platforms SR6850HW4 and SR6850HW4/M Product Guide