Installing The Front Panel I/O Board; Figure 123. Installing The Front Panel I/O Board - Intel SR6850HW4 - Server Platform - 0 MB RAM Product Manual

Servicing the Server Boards

Installing the Front Panel I/O Board

1. Observe the safety precautions, warnings, and cautions described in
5.
2. Set the front panel I/O board in place over the hooks. See letters "A" and "B" in Figure 123.
3. Slide the front panel I/O board forward until seated over the hooks. See letter "C" in the figure.
4. Engage the tab on the chassis into the slot on the board. Slide the front panel I/O board forward
until seated.
5. Tighten the captive screw. See letter "D" in the figure.
6. Reconnect all cables you disconnected when you removed the front panel I/O board. For
connection locations, see Figure 87.
7. Install the processor air baffle. For instructions, see
175.
8. Re-install the top cover. For instructions, see
220
D
C
A

Figure 123. Installing the Front Panel I/O Board

Intel® Server Platforms SR6850HW4 and SR6850HW4/M Product Guide
"Installing the Processor Air
"Installing the Top Cover", page 140.
B
B
C
"Safety Information", page
Baffle", page
TP01444