Creating Custom Application Objects; Editing And Deleting Application Objects - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Creating Custom Application Objects

Editing and Deleting Application Objects

Copyright © 2010, Juniper Networks, Inc.
You can create, edit, delete, and search for customized application objects under the
Custom Application Objects
application objects to represent applications that are not predefined. To add a custom
application object, in the Object Manager
Select
Application Objects
1.
Click the Add icon ( + ) to view the
2.
Configure the following parameters in the
3.
Name —This is a mandatory field.
Application Category
Supported Platforms
select at least one.
—Either a TCP or UDP port is mandatory. You can specify hyphen (-)
Port Ranges
separated port ranges of both types.
Configure the following parameters in the
4.
Port Binding:
—Select a predefined or custom application type from the
Application Type
drop-down list. This is a mandatory field.
—Specify comma separated ports. A range of ports is not
TCP Port Binding
allowed. You must configure either one TCP or UDP port for a custom application.
—Specify comma separated ports. A range of ports is not
UDP Port Binding
allowed. You must configure either one TCP or UDP port for a custom application.
Signature: Specify a DFA and a PCRE pattern under each of the following sections:
Client-to-server
Server-to-client
You must specify at least one DFA pattern.
Minimum Data Length:
Signature Match Order:
Click to create the application object. Else, click
OK
5.
Right-click on an application object and select
right-click on an application object and select
custom application object and not a predefined one.
tab in the
Application Objects
:
>
Custom Application Objects
New Custom Application
General
—This is a mandatory field.
—Use the Edit icon to select supported platforms You must
Detector
This is a mandatory field.
This is a mandatory field.
in order to edit it. Similarly, you can
Edit
to delete it. You can only delete a
Delete
Chapter 8: Configuring Objects
window. You can create custom
.
dialog box.
tab:
Tab:
Cancel.
331