Micromeritics Elzone II 5390 Operator's Manual page 92

Elzone II 5390 Confirm
Sample Information
Sample Information files contain information used to control the analysis. Therefore, an
analysis cannot proceed until it has been assigned a sample information file. A sample
information file consists of:
• Sample information
• Analysis conditions
• Material properties
• Report options
• Entered or Collected (appears after analysis is complete) data
Portions of the sample file can also exist as parameter files separate from the sample
information file itself. These parameter files contain frequently used analysis conditions,
material properties, and report options that can be conveniently loaded into a new sample
information file.
A sample information file can be created by an Analyst or a Developer. A Developer can
create a sample file in its entirety, specifying values for all parameters; all fields on the
dialogs are enabled for input from a developer. An Analyst can create a sample file by
selecting predefined parameter files from drop-down lists.
Analyst
The Sample Information dialog displays in this manner for an Analyst.
4-4 539-42822-01 (Rev B) - Nov 2017
New