Micromeritics Elzone II 5390 Operator's Manual page 68

Elzone II 5390 Confirm
5. Enter your password and click
displayed.
6. Click Instrument Setup
valid range specified; click
7. Click Optimize Settings
• Add sample to the electrolyte and continue with your analysis.
• Remove the beaker containing the electrolyte and place the beaker containing
sample on the sample stand; then continue with your analysis.
• Click
If you wish to save these settings for future use, click Save Settings to display the
Save as Analysis Conditions dialog. Enter an appropriate name and click OK. You
can then use the Replace button on the Analysis conditions portion of the sample
file to load the settings into your sample file.
3-32
OK
and ensure that Specify Diameter Range is selected and a
to close the dialog.
OK
. After the analyzer becomes idle, you may:
and restart your analysis when ready.
Close
; the second view of the Analysis dialog is
539-42822-01 (Rev B) - Nov 2017
Preparing for an Analysis