Micromeritics Elzone II 5390 Operator's Manual page 49

Creating a Sample Information File
7. Select the type of data for this file; you can have data collected automatically, enter
the data manually, or have the data collected and saved for a background.
8. If you have User Parameter fields defined, enter the appropriate values; refer to
Labels, page
9. Use the Comments window or the
information about the sample or analysis conditions. Information entered in the
Comments window appears in the header of some reports. Information you enter
using the
10. Edit the values for the Dilution Factor and the Mass Concentration if needed.
11. Use the Comments window or the
information about the sample or analysis conditions.Information entered in the
Comments window appears in the header of some reports. Information you enter
using the
12. After you complete the Sample Information dialog, click on the parameter tabs to
open associated dialogs and edit as desired. Instructions for completing these dialogs
are explained in
13. After you have completed all parameters, click
Information dialog is displayed.
a. Choose the directory into which the file is to be saved.
b. Edit the description; the Confirm program does not allow duplicate descriptions.
c. Enter a comment in the Comment window; for example, you may wish to enter
the date and time the file is created. You must enter a comment in the window;
otherwise,
d. Click
file dialog.
14. Click
Close
539-42822-01 (Rev B) - Nov 2017
7-4 for additional information on these parameters.
Add Log Entry push button displays in the Sample Log report.
Add Log Entry push button displays in the Sample Log report.
Creating Parameter
Save will not become enabled.
to complete the save operation and return to the Sample Information
Save
to close the dialog.
push button to enter additional
Add Log Entry
push button to enter additional
Add Log Entry
Files, page 3-3.
: the Save As Sample
Save
Elzone II 5390 Confirm
Edit
3-13