Micromeritics Elzone II 5390 Operator's Manual page 303

Appendix A
4212- At least one report item must be selected. Press Cancel if you do not want a
report.
Cause:
Action:
4213- Are you sure you want to delete the test?
Cause:
Action:
4214- The reference file is not valid. The overlay was not produced.
Cause:
Action:
4215- Coarser specification file is not valid. The overlay was not produced.
Cause:
Action:
4216- Finer specification file is not valid. The overlay was not produced.
Cause:
Action:
539-42822-01 (Rev A) - Nov 2017
You failed to select reports in the "Reports to Generate" list box. No
output could be produced.
Ensure that at least one report is selected for the sample and re-submit
the sample for reporting.
You selected on the Collected Data editor.
Delete
Click to remove the indicated test from the sample file. Click
Yes
to have the test remain in the sample file.
The reference file specified in the current file does not exist.
On the Report Options dialog, click
file.
The file specified for the coarser specification does not exist.
On the Report Options dialog, click
ferent file.
The file specified for the finer specification does not exist.
On the Report Options dialog, click
ferent file.
Elzone II 5390 Confirm
Reference and choose a different
Specification and choose a dif-
and choose a dif-
Specification
No
A-27