Micromeritics Elzone II 5390 Operator's Manual page 47

Creating a Sample Information File
4. Click on the down arrow to the right of each of the following fields to choose
appropriate parameter files, or you can accept the defaults displayed in the template:
• Analysis Conditions
• Material Properties
• Report Options
Remember, you can click
cannot edit them.
5. The remainder of the fields on the dialog display the values entered or chosen in the
selected Analysis Conditions file. You may edit any value in an enabled field. This
will change only the current file; it does not affect the values in the parameter file
chosen from the drop-down list.
6. The Reports to Generate window displays the reports to be generated (preceded
with a check mark). You may edit the selections, but you cannot edit details of the
reports.
7. After you have selected all parameters, click
dialog is displayed.
a. Choose the directory into which the file is to be saved.
b. Ensure that the description is as desired; the Confirm program does not allow
duplicate descriptions.
c. Enter a comment in the Comment window; for example, you may wish to enter
the date and time the file is created. You must enter a comment; otherwise
will not become enabled.
d. Click
8. Click
Close
539-42822-01 (Rev B) - Nov 2017
Advanced
to return to the Sample Information file dialog.
Save
to close the dialog.
to view details of parameter files, but you
; the Save As Sample Information
Save
Elzone II 5390 Confirm
Save
3-11