Micromeritics Elzone II 5390 Operator's Manual page 108

Elzone II 5390 Confirm
Smoothing
Data Format
Extrapolation
Ending Conditions 
Time
Volume
4-20
Select Smooth Data to reduce data scattering.
Use the Groups of drop-down list to choose the number
of size classes to be included.
The smoothing process defaults to 1; however, you can
have it repeated by choosing 2 from the Repetitions
drop-down list.
Enables you to choose the type of data format you wish
to store in the sample file. These choices affect the size of
the sample file.
Full resolution
This option saves and stores full-resolution data. Be sure
to select this option if you plan to generate pulse length
reports or if you are collecting background data.
Reduced
This option saves only the binned data; high-resolution
data are lost. The size of the file is reduced but you can-
not edit any data setup parameters (collected data dialog)
other that distribution and smoothing.
Store pulse length vs. particle size data
Select this option to have pulse length and particle size
data collected and stored for the Pulse length vs. particle
size data report. If this option is not selected, you will be
unable to generate the report.
Use this feature to complete data below the ending point
when data does not return to zero on the y-axis; missing
points will be calculated automatically.
You can also have data extrapolated after the analysis
(see Collected Data, page
Choose one of these options to specify when to end the
analysis.
Analysis ends when the specified time interval expires.
Analysis ends when the specified liquid volume is
reached.
).
4-43
539-42822-01 (Rev B) - Nov 2017
New