Micromeritics Elzone II 5390 Operator's Manual page 48

Elzone II 5390 Confirm
Developer
A Developer's view of the sample information dialog is more flexible than that of an Ana-
lyst. A Developer is allowed to view and edit (if desired) all parameters of the file.
Refer to Sample Information,
fields on the dialogs used in this procedure.
Perform the following steps to create a sample information file:
1. Select File > New > Sample Information; the Create a Sample Information File
dialog containing the available templates is displayed.
2. Choose a template, then click
3. Edit (or enter) the description in the Sample field; you can use up to 50 characters.
4. In the Operator field, enter the name of the Analyst who will be performing the
analysis.
5. In the Submitter field, enter the name of the department, company, etc. submitting
the sample for analysis.
6. Enter the bar code (if used). If you are not using bar codes, this line can be omitted
from the sample editor or it can be used for some other type of information. Refer to
Edit Labels, page
3-12
Developer, page
; the Sample Information dialog is displayed.
Create
7-4 for information on removing or editing this field.
Creating a Sample Information File
4-8
if you need clarification of the
539-42822-01 (Rev B) - Nov 2017