Micromeritics Elzone II 5390 Operator's Manual page 83

Generating Graph Overlays
6. On the Report options dialog, click
displayed.
7. Click Browse
dialog is displayed.
8. Choose a sample file, then click
9. After selecting the desired number of sample files, click
Report Options dialog.
10. Make any other selections if desired.
11. Click
Save
reason is displayed. Even if you don't save, all of the options regarding overlays and
anything else are available as your reports are generated.
12. Select Reports > Start Report; the Start Report screen is displayed with the name of
your primary file highlighted.
13. Click Report
• if you clicked
displayed.
• If you did not click
you can cancel the operation is displayed. If you choose to generate the preview
report, the Select Reports dialog is displayed.
14. Ensure that the desired graph is selected (preceded with a check mark), then click
OK .
539-42822-01 (Rev B) - Nov 2017
Overlays
to the right of the Sample 1
OK . You may choose up to eight files in this manner.
if you wish to save your Selected Reports list; a dialog prompting for a
; one of the following occurs:
Save to save specified overlay options, the Select Reports dialog is
Save , a dialog stating that a preview report will be generated or
Elzone II 5390 Confirm
; the Graph Overlay Samples dialog is
field; the Plot Overlay Sample Selection
to return to the main
OK
3-47