Micromeritics Elzone II 5390 Operator's Manual page 170

Elzone II 5390 Confirm
Optimize Settings
Data Setup
5-10
Enables you to have the optimum Load Resistor, Current,
and Gain determined. These values will be stored in the
analysis conditions file as well as in the collected data,
and as the optimized settings for the orifice/electrolyte
combination.
Typically, it is best to optimize settings with a beaker
containing only electrolyte; no sample. Then add your
sample after optimization is complete. Refer to
ing Instrument Settings, page
mation.
Disabled for an Analyst.
Enables you to edit data parameters.
Disabled for an Analyst.
Sample Analysis
Optimiz-
3-31 for additional infor-
539-42822-01 (Rev A) - Nov 2017