Micromeritics Elzone II 5390 Operator's Manual page 166

Elzone II 5390 Confirm
Number of tests
Background
Stirrer Speed
Stirrer Direction
Dilution Factor
Mass Concentration
Rinse
Report after analysis
5-6
Allows you to enter the number of analyses you wish to
perform using this sample file; you can perform up to
eight tests with each file.
This option enables you to have the data collected in this
analysis saved as a background.
Displays the stirrer speed specified in the sample file;
you can edit this value if desired. The lower the number,
the lower the speed; 0 (zero) turns the stirrer off.
Displays the stirrer direction (particle circulation) speci-
fied in the sample file; you can change the direction if
desired.
Displays the dilution factor specified in the sample file;
you can edit this value if desired.
Displays the concentration specified in the sample file;
you can edit this value if desired.
Displays the rinse options selected in the sample file; you
can edit these options if desired.
Displays the Reports Settings dialog so that you can
specify report output options.
This option does
not display for an
Analyst.
Select the option on this dialog to have reports printed
automatically after analysis. If you do not wish to have
reports generated automatically, you can generate them
after the analysis using the Start Report option on the
Reports menu.
Sample Analysis
539-42822-01 (Rev A) - Nov 2017