Micromeritics Elzone II 5390 Operator's Manual page 302

Elzone II 5390 Confirm
4208- An overlay file is not valid. It was not included in the report
Cause:
Action:
4209- The reference file is not valid. The report was not produced.
Cause:
Action:
4210- Coarser specification file is not valid. The report was not produced.
Cause:
Action:
4211- Finer specification file is not valid. The report was not produced.
Cause:
Action:
A-26
The sample file you selected for overlay does not exist or contains
invalid data.
From the Report Options dialog, click
ple file
You selected the Difference from Reference graph; it cannot be com-
puted because the reference file is invalid.
If a reference file has not been specified, select one from the Report
Options dialog and re-run the reports. If a file has been specified,
ensure that it contains valid information.
You selected the Out of Specification graph; it cannot be computed
because the coarse specification file is invalid.
If a specification file has not been specified, select one from the Report
Options dialog and re-run the reports. If a file has been specified,
ensure that it contains valid information.
You selected Out of Specification graph; it cannot be computed
because the fine specification file is invalid.
If a specification file has not been specified, select one from the Report
Options dialog and re-run the reports. If a file has been specified,
ensure that it contains valid information.
Appendix A
Overlays and remove the sam-
539-42822-01 (Rev A) - Nov 2017