Micromeritics Elzone II 5390 Operator's Manual page 37

Creating File Templates
3. OPERATIONAL PROCEDURES
This chapter contains brief step-by-step instructions on how to:
• create sample and parameter file templates, beginning on this page
• create a parameter file, page
• create a sample file, page
• perform a background, page
• calibrate orifice tubes, page
• prepare for an analysis, page
• optimize instrument settings, page
• perform an analysis, page
• print contents of a parameter or sample file, page
• list file statistics, page
• import sample and parameter files, page
• export a sample file, page
• convert a file used with a previous version of the Elzone to be compatible with
Elzone II, page
• generate overlays, page
This chapter does not provide detailed descriptions of the fields in the dialogs used to per-
form these procedures. Refer to Chapters 4 through 7 for field descriptions. Use the table
of contents or index to assist you in locating the appropriate dialog.
Some procedures cannot be performed by the Analyst; these procedures are marked
accordingly.
Creating File Templates
An Analyst is not authorized to create sample and parameter file templates.
When you create a sample or parameter file, a dialog containing templates is displayed so
that you can choose one on which to base your file. Several predefined templates have
been included with the Confirm program. A new template can be created using the values
from existing sample files. For example, you may wish to create a template from a sam-
ple file that you used with a sample material that you analyze on a routine basis.
A template cannot be edited; however, the values in the sample file you create using a
template can be edited.
539-42822-01 (Rev B) - Nov 2017
3-3
3-10
3-14
3-18
3-26
3-31
3-36
3-39
3-41
3-42
3-45
Elzone II 5390 Confirm
3-38
3-40
3-1