Micromeritics Elzone II 5390 Operator's Manual page 85

Generating Graph Overlays
6. Click Edit
displayed.
7. Make your selections and click
again to return to the Report Options dialog.
8. Make any other selections if desired.
9. Click Save
options regarding overlays and anything else are available as your reports are run.
10. Select Reports > Start Report; the Start Report screen is displayed with the name of
your primary file highlighted.
11. Click
Report
• if you clicked
displayed.
• If you did not click
you can cancel the operation is displayed. If you choose to generate the preview
report, the Select Reports dialog is displayed.
12. Ensure that the desired graph is selected (preceded with a check mark, then click
539-42822-01 (Rev B) - Nov 2017
; the Report Options dialog enabling you to specify the plot to overlay is
Ok
to save your Selected Reports list. Even if you don't save, all of the
; one of the following occurs:
to save specified overlay options, the Select Reports dialog is
Save
, a dialog stating that a preview report will be generated or
Save
to return to the graph options dialog, then
Elzone II 5390 Confirm
OK
.
OK
3-49