Micromeritics Elzone II 5390 Operator's Manual page 105

New
Blockage
Pump and fan off during 
data collection
Data Setup
539-42822-01 (Rev B) - Nov 2017
You can choose to have blockages detected and cleared
during analysis (default) and/or at the start of the analy-
sis.
Turns the pump and fan off during data collection. You
may wish to use this option for extremely noise-sensitive
applications, such as when using a small orifice tube (19
or 30 m) with low conductivity electrolytes.
Displays the Data Setup dialog enabling you to specify
how raw data are to be produced.
After analysis is complete, the parameters for data setup
can be edited by clicking
Data dialog explained on page 4-43.
Elzone II 5390 Confirm
on the Collected
Data Setup
4-17