Micromeritics Elzone II 5390 Operator's Manual page 39

Creating Parameter Files
6. Click Save
the same description currently exists. Edit the description to enable
Confirm program does not allow duplicate file descriptions.
7. Click Close

(file name) has been changed. Save changes before closing?
8. Click No
Creating Parameter Files
An Analyst is not authorized to create parameter files.
The following file types can exist as part of the sample information file, as well as indi-
vidual parameter files:
• Analysis conditions
• Material properties
• Report options
Having these files exist independently allows you to use them over and over again.
Several predefined parameter files are included with the Confirm program. Although
these files may come close to the needs of your laboratory, you may wish to define addi-
tional ones. Or you can use a predefined file as a starting point. You can do this by
creating a new file and then selecting
select the existing parameter file. The values are copied into the file. You can edit the file
in any way desired without affecting the file from which the values were copied.
539-42822-01 (Rev B) - Nov 2017
to save the template. If
on the sample file; the following error message is displayed:
(unless you wish to save the changes made) to close the dialog.
Save does not become enabled, a file containing
Replace . A dialog is displayed so that you can
Elzone II 5390 Confirm
Save . The
3-3