Micromeritics Elzone II 5390 Operator's Manual page 293

Appendix A
Cause C:
Action C:
2511- Print job (name) has been cancelled due to insufficient disk space. Delete
unnecessary files and restart the report.
Cause:
Action:
2512- Print job (name) has been canceled.
Cause:
Action:
2513- Unable to read the calibration file (file name).
Cause:
Action:
2514- Unable to write the calibration file (file name).
Cause:
Action A:
Action B:
539-42822-01 (Rev A) - Nov 2017
An internal processing error occurred.
Contact your service representative.
The disk drive does not have enough space for the temporary file
required by the Windows Print Manager. Therefore, printing of the
requested report has been canceled.
Delete unnecessary files form the disk. You will require at least five
megabytes of free space for normal operation.
The requested print job was canceled at your request.
None required.
The calibration file selected for loading is not valid or cannot be read.
Confirm the media containing the alleged calibration file has no prob-
lems.
An attempt to Save calibration data has failed due to possible media
problems
Confirm the media containing the alleged calibration file has no prob-
lems.
Choose an alternate media to Save the calibration data.
Elzone II 5390 Confirm
A-17