Micromeritics Elzone II 5390 Operator's Manual page 38

Elzone II 5390 Confirm
Perform the following steps to create a template using a sample file.
1. Select File > Open >Sample information; the Open Sample Information dialog is
displayed.
2. Choose the desired file, then click
3. Edit the fields of all parameters (click the tabs to access each parameter) as desired.
4. Select File > Save As Template, then choose:
• Sample information to save all parameters as a sample file template; the Save As
Sample Template dialog is displayed. You can also click
Sample Information dialog if you are saving all parameters as a template. You
cannot save parameter file templates using this push button.
• a parameter file to save the values of one of the parameters as a parameter file
template. For example, select Analysis conditions to save the values in the
Analysis conditions dialog box as a template for Analysis conditions files; the Save
as Analysis Conditions Template dialog is displayed.
You can also create parameter file templates using existing parameter files.
5. Enter an appropriate description in the ID field of the dialog for the type of template
you are creating; you can use up to 42 characters. Be sure to use an intuitive
description.
3-2
; the Sample Information dialog is displayed.
Open
Save As Template
539-42822-01 (Rev B) - Nov 2017
Creating File Templates
on the