Micromeritics Elzone II 5390 Operator's Manual page 301

Appendix A
4204- Coarser specification file is not valid. 'Out of spec.' column was deleted.
Cause:
Action:
4205- Finer specification file is not valid. 'Out of spec.' column was deleted.
Cause:
Action:
4206- The tabular report has no valid columns selected. No report produced.
Cause:
Action:
4207- No valid data are available for this report. No report produced.
Cause:
Action:
539-42822-01 (Rev A) - Nov 2017
You requested a tabular report with Out of Specification selected as
one of the columns. This quantity cannot be computed because the
coarse specification file is invalid.
If no specification file has been specified, select one from the Report
Options dialog and re-run the reports. If a file has been specified,
ensure that it contains valid information.
You requested a tabular report with the Out of Specification selected
as one of the columns. This quantity cannot be computed because the
finer specification file is invalid.
If no specification file has been specified, select one from the Report
Options dialog and re-run the reports. If a file has been specified,
ensure that it contains valid information.
You requested a tabular report with all of the columns set to none.
Edit the options for that table and select a variable in at least one col-
umn of the table.
The selected test in the sample file activated for reporting does not con-
tain any valid data.
If the sample is still analyzing, wait until enough data have been col-
lected to allow reporting. If the sample is complete, an error or operator
intervention stopped this analysis before sufficient data could be
collected. The analysis may be deleted from the file.
Elzone II 5390 Confirm
A-25