Micromeritics Elzone II 5390 Operator's Manual page 291

Appendix A
2500 Series
2501- System resources have reached a dangerously low level. Please close some
windows to avoid the loss of data.
Cause:
Action:
2502- Error writing to file (name) during print. Error code: (number).
Cause:
Action:
2503- Error converting file (name). Could not create DIO intermediate file.
Cause A:
Action A:
Cause B:
Action B:
2504- Cannot create output file for sample (name).
Cause:
Action:
2505- Error Logger cannot be initialized. Error code (number). Program will exit.
Cause:
Action:
539-42822-01 (Rev A) - Nov 2017
A large number of windows are open and consuming the system
resources available to all applications.
Close one or more windows on the screen. Contact your Micromeritics
service representative if you continue to receive this error message.
An error occurred in the file being written to during a print operation.
Ensure that there is sufficient space on the drive containing the file.
Insufficient space is available on the hard disk. The DIO file is placed
in the directory specified by the TEMP environment variable.
Determine if there is sufficient space on the drive where the TEMP
directory is located.
An internal processing and/or hardware error has occurred.
Contact your service representative.
Insufficient space may be available on the hard disk.
Ensure that sufficient space is available. Contact your service repre-
sentative if you continue to receive this message.
An internal processing and/or hardware error has occurred.
Contact your service representative.
Elzone II 5390 Confirm
A-15