Micromeritics Elzone II 5390 Operator's Manual page 46

Elzone II 5390 Confirm
Creating a Sample Information File
A sample information file must be created for each analysis. The sample information file
consists of information groups which, collectively, identify the sample, guide the analy-
sis, and specify report options.
A sample file can be created by a Developer or an Analyst.
Analyst
An Analyst creates a sample information file by choosing predefined parameters. Param-
eter details can be viewed by switching to the Advanced format, but editing is not
allowed. Perform the following steps to create a sample information file:
Refer to Sample Information,
on the dialogs used in this procedure.
1. Select File > New > Sample Information; the Create a Sample Information File
dialog containing the available templates is displayed.
2. Choose the desired template, then click
is displayed.
3. Edit the description in the Sample field; or enter a new one.
3-10
Analyst, page 4-4 if you need clarification of the fields
; the Basic Sample Information dialog
Create
Creating a Sample Information File
539-42822-01 (Rev B) - Nov 2017