Setting Originals; Setting Originals On The Exposure Glass - Ricoh 3245e Operating Instructions Manual

Setting Originals

Limitation
Set the original after correction flu-
id and ink has completely dried.
Not taking this precaution could
mark the exposure glass and cause
marks to be copied.
Note
Basically the originals should be
aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the direction of the
originals. For details, see explana-
tions of each function.
Originals Set in the
document
feeder
R
R
R
R
Reference
See P.20 "Originals".
Setting Originals on the
Exposure Glass
A
Lift the platen cover or the docu-
ment feeder.
B
Set the original face down on the
exposure
Set on the
should be aligned to the rear left
exposure
corner.
glass
set1EE
1: Reference mark
2: Scale
set2EE
C
Lower the platen cover or the doc-
ument feeder.
Note
Be sure to open the platen cover
or the document feeder by more
than 30 , otherwise the original
size might not be detected cor-
rectly.
glass. The
1
2
Note
Start with the first page to be
copied.
Setting Originals
2
original
ND1C01EE
29