Memory Storage Report; Transmission Result Report (Memory Transmission) - Ricoh 3245e Operating Instructions Manual

Chapter2 Page 30 Thursday, January 27, 2000 1:54 PM
Sending a Fax Message
- Batch Transmission - - -
If you send a fax message by Memory
Transmission and there is another fax
message waiting in memory to be
sent to the same destination, that
message is sent along with your orig-
2
inal. Several fax messages can be sent
with a single call, thus eliminating the
need for several separate calls. This
helps save communication costs and
reduce transmission time.
Fax messages for which the transmis-
sion time has been set in advance are
sent by batch transmission when that
time is reached.
Note
By default Batch Transmission is
switched on. You can switch it on
or off with the User Parameters.
P.227 "Changing the User Parame-
ters"
- ECM (Error Correction Mode) -
- -
This feature automatically resends
data that was not transmitted suc-
cessfully using a system that complies
with international standards.
ECM requires that the destination
machine has the same feature.
Note
By default ECM, is switched on.
You can change this with the Key
Operator Settings.
Operator Settings"
30

Memory Storage Report

This report is printed after an original
is stored in memory. It helps you re-
view the contents and the destina-
tions of stored originals. Even if the
machine is set up not to print this re-
port, it is still printed if an original
could not be stored.
Note
You can turn this report on and off.
By default it is not printed.
"Changing the User Parameters"
You can choose whether to include
part of the original image on the re-
port (part of the image is printed
by default).
User Parameters"
Transmission Result Report
(Memory Transmission)
This report is printed when a Memo-
ry Transmission is completed so you
can check the result of the transmis-
sion. If two or more destinations are
specified, this report is printed after
the fax message has been sent to all
the destinations. If the machine is set
up not to print this report and the fax
message could not be successfully
transmitted, the Communication Fail-
ure Report is printed.
munication Failure Report"
Note
By default, this function is turned
P.182 "Key
on. You can turn it off with the
User Parameters.
ing the User Parameters"
You can choose whether to include
part of the original image on the re-
port (by default, part of the image
is printed).
User Parameters"
P.227
P.227 "Changing the
P.31 "Com-
P.227 "Chang-
P.227 "Changing the