F Code (Sid); Jbig Transmission - Ricoh 3245e Operating Instructions Manual

Chapter2 Page 57 Thursday, January 27, 2000 1:54 PM

F Code (SID)

There are times when you may wish
to use a "SID" (Sender ID) when
sending confidential faxes with the F
Code "SUB" feature.
Limitation
You can enter a SID up to 20 digits
long.
Note
Messages you send using this fea-
ture are marked "SID" on all re-
ports. P.170 "Reports/Lists"

JBIG Transmission

The optional Fax Function Upgrade Unit
is required.
If you use JBIG (Joint Bi-level Image
Experts Group) compression you can
send photographic originals faster
than the other compression method.
Limitation
This feature is not available in G4.
If ECM is turned off, JBIG Trans-
mission is not available.
This feature requires that the other
party's fax machine has both the
JBIG function and ECM function
(G3 communication only).
Transmission Features
2
57