Ricoh 3245e Operating Instructions Manual page 35

System Settings
Menu
17. Contrast
18. User Code Manage
If the machine is set to use the User Code function, operators must input their user
codes before the machine can operate. The machine keeps count of the number of cop-
ies made under each user code.
Note
Enter a previously registered key operator code with the Number keys.
Reference
"Key Operator Code"
Code Manage-Copy
19. Management Setting
Use these settings to manage use of the machine.
Note
Enter a previously registered key operator code with the Number keys.
Reference
"Key Operator Code"
Show/PrintCounter
Print CounterList
Key Operator Code
Reg/Chg KeyOpCode
5
/
7
Description
You can adjust the brightness of the panel display.
Specify whether to employ user codes to restrict copier us-
ers and manage the number of copies made.
Note
Default: No
You can check and print the number of copies made under
each function.
You can print the counter data for all functions.
If you select "Yes", only operators who know the key oper-
ator code can access the "18. User Code Manage" and "19.
Management Setting" user tools.
Note
Default: No
If you select "Yes", you should register the key operator
code. See below.
Use to register or change the key operator code (up to 8 dig-
its).
Settings You can Change with the User Tools
2
27