G4 Digital Line - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 223 Thursday, January 27, 2000 1:57 PM

G4 Digital Line

This function must be set when you
connect the machine to the ISDN dig-
ital line.
You can register the following items:
• TID (up to 22 digits)
• Own Fax Number (up to 20 digits)
• Subaddress
Note
Optional ISDN Unit required.
You can use a G4 TID if you use the
ISDN. The G4 TID is information
to be printed on a destination ma-
chine when you send a fax using
G4 down the ISDN.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the code for "Fax" with the
number keys.
P.48 "Subaddress"
Key Operator Settings
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, see the System Settings
manual.
D
Enter the number for "Key Op.
Settings" with the number keys
and press the { { { { #} } } } (Enter) key
within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [ Next].
E
Enter the "G4 Digital Line" code
with the number keys.
Note
If "G4 Digital Line" is not
shown, press [ Prev.] or [ Next].
To Enter the Your Own Fax Number
A
Enter the "Own Fax Number"
code with the number keys.
7
223