Number Keys - Ricoh 3245e Operating Instructions Manual

Chapter2 Page 46 Thursday, January 27, 2000 1:54 PM
Sending a Fax Message

Number Keys

Enter numbers directly using the key
pad on the right side of the operation
panel.
Note
2
Maximum length of a fax number:
254 digits.
You can insert pauses and tones in
a fax number.
"Tone"
If the optional ISDN Unit is in-
stalled, you may need to enter a su-
baddress.
A
Set your original and select any
scan settings you require.
Reference
P.19 "How to Set an Original"
P.39 "Scan Settings"
B
Enter the fax number with the
number keys.
The digits appear on the display as
you enter them.
46
P.47 "Pause", P.48
P.48 "Subaddress"
Note
If you make a mistake, press the
{Clear/Stop} key to erase the
wrong digits and try again.
If you wish to send this message
to more than one destination,
press [Add], then enter the next
destination.
If the optional ISDN Unit is in-
stalled, select G3 or G4 before
you go to the next step.
"Changing the Line Type"
C
Press the { { { { Start} } } } key.
- Restrictions When Dialing with - - -
the number Keys
Fax numbers entered with the num-
ber keys are stored in internal memo-
ry (separate from memory for storing
original data). Therefore, you cannot
program more than 100 numbers
with the number keys for the follow-
ing:
• Destinations specified in a Memo-
ry Transmission (including Confi-
dential Transmission and Polling
Reception)
• Transfer Stations and End Receiv-
ers specified in a Transfer Request
• Destinations and Transfer Stations
specified in a Group
For example, when 90 destinations
are registered in a Group with the
number keys, only 10 destinations
can be dialed for Memory Transmis-
sion from the number keys.
P.43