Rti/Tti - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 187 Thursday, January 27, 2000 1:57 PM
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, see the System Settings
manual.
D
Enter the number for "Key Op.
Settings" with the number keys
and press the { { { { #} } } } (Enter) key
within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [ Next].
E
Enter the number for "Personal
Code" with the number keys.
Key Operator Settings
Note
If "Personal Code" is not
shown, press [ Prev.] or [ Next].
F
Enter the number for "Print Pers.
Code" with the number keys.
Note
If "Print Pers. Code" is not
shown, press [ Prev.] or [ Next].
G
Press the { { { { Start} } } } key.
When printing is completed, the
display shown in step F appears
again.
Note
If you press [Cancel] before
printing starts, the printing
stops and the display shown in
step F appears again.
H
Press [PrevMenu] twice.
I
Press the { { { { User Tools/Counter} } } } key.

RTI/TTI

An RTI (Receive Terminal Identifica-
tion) is passed to a receiver or sender
when you send or receive a fax. When
the RTI is received, it is shown on the
display and printed in a report at the
other end.
The TTI (Transmitter Terminal Identi-
fication) is printed on the header of
every fax you send.
You usually should contain your
name in both of these identifications.
You can store two TTI identifications:
"TTI 1" and "TTI 2".
7
187