Table of Contents
Advertisement
SETTING ORIGINALS
Limitation
Set the original after correction fluid and
ink have completely dried. Not taking this
precaution could mark the exposure glass
and cause marks to be copied.
The maximum load that the (optional)
original tray can carry is 4 kg (8.8lb). Set
the originals gently.
Note
Basically the originals should be aligned
to the rear left corner. However, some copy
functions may produce different results
depending on the orientation of the origi-
nals. For details, see the individual func-
tional descriptions.
Note
See ⇒ P.11 "ORIGINALS."
Setting Originals On The
Exposure Glass
1
Lift the platen cover or the document
feeder.
Note
Be sure to open the platen cover or the
document feeder by more than 30°, other-
wise the original size might not be detected
correctly.
2
Set the original face down on the expo-
sure glass. The original should be
aligned to the rear left corner.
3
Lower the platen cover or the document
feeder.
Note
Be sure to close the platen cover or the
document feeder when setting the original
on the exposure glass. The machine might
fail to sense the correct original size if your
hand, arm, or sleeve is placed on the expo-
sure glass.
SETTING ORIGINALS
A : Reference mark
B : Scale
21
Advertisement
Table of Contents
