Basic Operation; Using As A Scanner; Changing To Scanner Mode; Interrupting Scanning - Ricoh 3245e Operating Instructions Manual

Using as a scanner

Changing to Scanner Mode

This scanner unit has two scanner
functions: the "Network TWAIN
Scanner" and the "Network Delivery
Scanner".
Reference
To configure the function priority,
see P.18 "Scanner Setting Items".
Limitation
In the following cases, the machine
cannot be used as a scanner.
• While scanning originals for
copying
• While scanning a fax message
for transmission
• During immediate fax transmis-
sion
Using the Network TWAIN Scanner
A
Set originals.
B
Configure the scan options using
the computer.
C
Start the scan.
Reference
For more information about us-
ing the Network TWAIN Scan-
ner, see Type 270 TWAIN
Driver Ver.2 help.

4. Basic Operation

Using the Network Delivery Scanner
A
Press {Scanner}.
The screen for the scanner mode
appears.
B
Set originals.
C
Set the scan options, an address
and a sender.
D
Press {Start}.
Reference
For more information about us-
ing the Network Delivery Scan-
n e r , s e e t h e " O p e r a t i n g
Instructions" that come with
ScanRouter.

Interrupting Scanning

If you want to scan while copying or
faxing, follow the procedure below.
Scanning while copying
Usually, you cannot use this machine
as a scanner until it finishes copying.
Preparation
Select "06.Function Switch" of the
"System Settings" menu to set "In-
stant". For more information about
how to access this menu, see the
"System Settings".
A
Press {Clear/Stop}.
Copying is interrupted.
29