Ecm - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 217 Thursday, January 27, 2000 1:57 PM
F
Enter the "Print Sender List" code
with the number keys.
G
Press the { { { { Start} } } } key.
Note
If you press [Cancel] before
printing starts, the printing
stops.
H
Press [PrevMenu] twice.
I
Press the { { { { User Tools/Counter} } } } key.

ECM

If a part of a transmission fails be-
cause of a line problem, the lost data
is automatically resent. For this fea-
ture to work, the other machine must
have ECM. By default, ECM is turned
on, but you can change this with the
following procedure.
Limitation
If you turn ECM off, you cannot
use the following features:
• JBIG Transmission
• Super G3 Communication
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Key Operator Settings
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, see the System Settings
manual.
D
Enter the function number for
"Key Op. Settings" with the num-
ber keys and press the { { { { #} } } } (Enter)
key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [ Next].
E
Enter the "ECM" code with the
number keys.
7
217