Having Incoming Messages Printed On Paper From The Bypass Tray - Ricoh 3245e Operating Instructions Manual

Chapter3 Page 77 Thursday, January 27, 2000 1:55 PM
Having Incoming Messages Printed on Paper From the Bypass
Tray
You can have messages sent from Specified Senders printed on paper from the
Bypass Tray. This is useful if you need messages printed on a size of paper not
stocked in the paper cassette(s).
Limitation
When the optional Fax Expansion Memory is installed, you can set paper be-
tween 5.5" (148mm) and 17" (432mm) long in the Bypass Tray.
Note
Before you can use this feature, you need to turn on Authorized Reception
(Initial Setup RX settings), program the Specified Senders (Key Operator Set-
tings) along with the Paper Tray set to "Bypass Tray".
RX", P.199 "Special Senders to Treat Differently (Special RX Nos.)"
The only sizes of paper that can be automatically detected when loaded in the
bypass tray are as follows: DLT landscape, LG landscape. For how to load
other sizes of paper, see "Copying from the Bypass Tray" in the Copy Refer-
ence. P.176 "To Set the Bypass Paper Size"
If the specified paper size and the size of paper set in the Bypass Tray do not
match, paper jams may occur and the image may be truncated.
If you use this feature, Image Rotation is not possible.
Printing Functions
P.174 "Initial Setup
77
3