System Settings - Ricoh 3245e Operating Instructions Manual

System Settings

Menu
09. Energy Saver Mode The machine enters Energy Saver mode in the following
10. Auto Off Timer
3
/
7
Description
cases:
• If you hold down the {Clear Modes/Energy Saver} key for
about a second or more.
• When the preset time selected with the Low Power Tim-
er has passed.
Reference
See "08. Low Paper Timer" in
2
/ ".
7
In Energy Saver mode, power consumption is saved as
shown below, as compared with Stand-by mode.
• Level 1 (default): Saving about 20%
• Level 2: Saving about 25%
Warm-up time required for Energy Saver mode to return to
the ready condition is as follows:
• Level 1 (default): About 3 seconds
• Level 2: About 10 seconds
Note
Default: Level 1
The values above are references applicable to Type 1
(mainframe only).
The machine turns itself off automatically to conserve ener-
gy after your job is finished, after the selected time. This
function is called "Auto Off ". The time can be set from 1 to
240 minutes.
Note
Default: 60 minutes
Auto Off might not be effective when the machine is in
the following conditions:
• An error message is displayed.
• The remaining memory space for facsimile or scan-
ner mode is less than 100%.
To return to the ready condition from Auto Off, the ma-
chine requires the same warm-up time as the time for be-
coming ready after its power is turned on.
When the machine receives a fax or printer data in Auto
Off mode, it automatically prints the fax or the printer
data.
Settings You can Change with the User Tools
P.22 "System Settings
2
23