Tone; Subaddress - Ricoh 3245e Operating Instructions Manual

Chapter2 Page 48 Thursday, January 27, 2000 1:54 PM
Sending a Fax Message

Tone

This feature allows a machine con-
nected to a pulse dialing line to send
tonal signals (for example if you want
to use a special service on a tone dial-
ing line). When you press the {Tone}
2
key, the machine dials the number us-
ing tonal signals.
Limitation
You cannot place a tone before the
first digit of a fax number.
Some services may not be available
when using the {Tone} key.
Note
A tone is shown as a "•" on the dis-
play.
- Sending Tonal Signals by ISDN -
- -
(optional ISDN Unit Required)
You can still send tone signals to a G3
user even if the machine is only con-
nected to an ISDN line.
Note
This feature can only be used for
Memory or Immediate Transmis-
sion. You cannot dial through
ISDN using On-hook Dial or Man-
ual Dial.
48

Subaddress

The optional ISDN Unit is required.
ISDN allows two or more terminals
(such as a fax machine and digital
telephone) to be connected to a single
line. These terminals are identified by
their subaddress numbers. If the ter-
minals connected to the line at a des-
tination are assigned subaddresses,
dialing a subaddress allows you to di-
rect your fax message to a particular
terminal at the destination.
Limitation
Subaddresses can only be used
with ISDN.
Note
You need to program a User Func-
tion key with the Subaddress func-
tion. P.179 "Assigning User
Function Keys"
You can program a subaddress in a
Quick Dial or Speed Dial.
A
Set your original and select any
scan settings you require.
B
Select either G4 or G3 (ISDN).
Note
When the optional ISDN Unit is
installed, the line used for G3 is
set to ISDN.
C
Dial the fax number with the
number keys.