Setting Originals On The Exposure Glass (Platen Glass) - Ricoh 3245e Operating Instructions Manual

Setting Originals on the Exposure Glass
(Platen Glass)
The exposure glass (platen glass) can be used when scanning originals that cannot
be set in the document feeder (ADF), such as books or originals that have been
pasted together. These types of originals will be referred to as "book originals".
Follow the procedure below to set originals on the exposure glass (platen glass).
A
Lift the platen cover or the document feeder (ADF), and place the original
face down on the exposure glass (platen glass).
Align the original with the reference mark.
1
1. Reference mark
Important
Set the original after correction fluid and ink has completely dried. Not
taking this precaution could mark the exposure glass (platen glass) and
cause marks to be copied.
Note
Set the original in the direction shown in the illustration. The direction of
resulting scan is as follows.
1
1. Reference mark
B
Lower the platen cover or the document feeder (ADF).

Setting Originals on the Exposure Glass (Platen Glass)

TACY010E
4
TACY020E
31